Sunday, July 17, 2011

Choice and therefore the use of spray paint

Paint sprayers have an understandable advantage: they'll unfold trim colours, and after all faster than any brush or roller. however equally necessary is their ability to use an even layer of uneven surfaces like shutters and balustrades of the staircase - a breeding ground for dripping brush. And since the sprayers atomize the liquid into a fine mist, which might produce a mirror end on the cupboards or furniture where brush marks even less acceptable.

Sprayers aren't perpetually the most effective answer, however. Minor rarely justified the difficulty of cleaning them
(sometimes a straightforward will of spray paint can do), and a brush is best that you just will check the cleanliness in mind. however when a sprinkler features a sense, the success depends on selecting the correct one for work and therefore the mastery of bound techniques. to start with, given what is going on on {and will|and will} end using spray - spray vary greatly in thickness of the end can handle the number of paint they provide and therefore the excess manufacture, among alternative factors. In general, there are 2 categories: sprayers use air to atomize the end and airless sprayers. each have benefits and downsides, and there's a good vary of quality and value at intervals every class.

Caution

Airless sprayers operate at terribly high pressure. If the finger (or any a part of the body) is just too near the tip, the coating may be injected below the skin. during this case, immediately look for emergency treatment, and take care to let healthcare supplier that you just have an injection wound. The injury doesn't appear thus unhealthy, however most of the coating materials contain dangerous toxins that has got to be eliminated.

Click through the presentation of the left to look at a good vary of sprayers, their uses and therefore the execs and cons of every.

Buy Tool Force A-C5 Air Brush Kit

Tool Force A-C5 Air Brush Kit

Product Specifications

Part Number:A-C5
Item Package Quantity:1

Technical Details

  • Air brush kit provides maximum versatility
  • Working pressure of 15-to-50 psi
  • Constructed with glass jars and brass fittings
  • Includes fine head air brush, 15-foot vinyl hose, 2 3/4-ounce jars with lids, proper regulator, adaptor, and air brush body with finger valve
  • Spray pattern that adjusts from 1/4-to-1-1/2-inches

Product Description

Amazon.com Product Description


The Tool Force air brush kit offers versatility and performance. The kit includes a fine head air brush, 15 foot vinyl hose, two 0.75-ouncez jars with lids, a proper regulator, an adaptor and an air brush body with finger valve. The tools perform at a working pressure of 15-50 PSI, and the air brush offers a .spray pattern that adjusts from 1/4-to-1-1/2 inches. Constructed with glass and brass fittings, this kit is designed for durability.

What's in the Box

Fine head air brush, 15-foot vinyl hose, two 3/4-ounce jars with lids, proper regulator, adaptor, and air brush body with finger valve.

Product Description


The Tool Force air brush kit offers versatility and performance. The kit includes a fine head air brush, 15 foot vinyl hose, two 0.75-ouncez jars with lids, a proper regulator, an adaptor and an air brush body with finger valve. The tools perform at a working pressure of 15-50 PSI, and the air brush offers a .spray pattern that adjusts from 1/4-to-1-1/2 inches. Constructed with glass and brass fittings, this kit is designed for durability. What's in the Box Fine head air brush, 15-foot vinyl hose, two 3/4-ounce jars with lids, proper regulator, adaptor, and air brush body with finger valve.Air brush kit provides maximum versatilityWorking pressure of 15-to-50 psiConstructed with glass jars and brass fittingsIncludes fine head air brush, 15-foot vinyl hose, 2 3/4-ounce jars with lids, proper regulator, adaptor, and air brush body with finger valveSpray pattern that adjusts from 1/4-to-1-1/2-inches

Buy Tool Force A-C5 Air Brush Kit

Tuesday, July 12, 2011

Buy Wagner 0515034 ProCoat Stand Airless Paint Sprayer

Wagner 0515034 ProCoat Stand Airless Paint Sprayer

Product Specifications

Part Number:0515034
Item Package Quantity:1
Item Dimensions
Length:15.50 inches
Width:17.25 inches
Height:12.50 inches

Technical Details

  • Sprays a gallon of paint in 5 minutes - Sprays thick latex, oil-based paints, stains and sealers - Draws paint directly from the paint can
  • Draws paint directly from a one gallon or five gallon paint can - Includes 25' high pressure airless spray hose - Use up to 100' of spray hose on this sprayer - Includes Handle for easy transport around your paint project
  • Rugged Sprayer with commercial grade metal spray gun and 25' airless spray hose and reversible airless spray tip size 515 included
  • Supports up to a .015 airless spray tip and includes a gun swivel
  • Inlet Valve pusher for quick prime - Adjustable pressure control for low overspray and variety of materials - Reversible spray tip allows you to quickly clear out any paint clogs by reversing the spray tip

Product Description

From the Manufacturer


The Wagner ProCoat is a 2800 PSI electric piston pump paint sprayer capable of spraying today's thick latex paints without thinning at .24 GPM (Gallons per minute) with a 1/2 HP motor. It produces the same great finish found with professional sprayers with features designed for the home-owner. Draw paint, stain, or sealers directly from the can. The adjustable pressure controls overspray while the spray gun swivel increases comfort. Great for whole house painting yet simple enough for sheds, fences, and decks. Paint your house, barn, shed, garage, deck, fence, cabin, lawn furniture, awning, lattice, and children's playground equipment. It sets up in less than 5 minutes by simply snapping the inlet hose in place and attaching the pressure hose and gun to the outlet. A garden hose connects to the inlet for a quick flush cleaning the entire system in less than 10 minutes. Proven Piston Pump technology and contractor grade siphon tube creates a reliable pump for the homeowner spraying thick latex paints as well as thin stains and sealers in one sprayer. Includes 25' high pressure spray hose, commercial grade metal spray gun, and 515 spray tip. Spray like the pros do.

Product Description


The ProCoat allows users to draw paint directly from 1 or 5 gallon cans. It's powerful 2800 P.S.I. piston pump, coupled with a 25' hose and lightweight metal spray gun model No. GX 05 with 515 reversible tip and integrated tip holder easily tackles large projects. A full size in line filter accepts standard G thread (7 8''). Pressure selector allows you to adjust them from 1000 to 2800 P.S.I. The ProCoat sprays most architectural coatings including thick exterior latex paints without thinning. Convenient carrying handle and lightweight design for easy movement around the job site. Centrally located controls simplify operation from start up to clean up. .24 GPM piston pump. The unit has a suction tube for use with either a 1 or 5 gallon can. Powered by electric 120V 1 2 HP motor. Refer to SKU 790424 for 25' replacement hose. Refer to SKU 789062 for replacement gun. Tip sizes range from a 0.009'' to 0.015'' orifice. Contact Wagner for additional tips.

Buy Wagner 0515034 ProCoat Stand Airless Paint Sprayer

Sunday, July 10, 2011

Buy Vaper 19220 HVLP Triple Set-Up Spray Gun Kit 4 Piece

Vaper 19220 HVLP Triple Set-Up Spray Gun Kit 4 Piece

Product Specifications

Part Number:19220
Item Package Quantity:1
Batteries Included?:No
Batteries Required?:No
Item Dimensions
Weight:4 Pounds
Length:18.20 inches
Width:16.60 inches
Height:4.50 inches

Technical Details

  • Gun A is 1.0 mm nozzle set for touch up work
  • Gun B is 1.4mm nozzle set for lighter materials
  • Gun C is 1.7mm nozzle set for heavier materials
  • Locking pressure regulator with gauge
  • Aluminum paint cups

Product Description

From the Manufacturer


4 pc H.V.L.P. Triple Set-Up Spray Gun Kit

Product Description


Kit includes 3 different spray guns to cover your spraying needs, plus pressure regulator. Guns have die-cast aluminum body and 2-step trigger control. Nozzles Included (qty.): 3, Required CFM: 7 - 9, Operating PSI: 15 - 45, Nozzle Size (mm): 1.0, 1.4, 1.7, Paint Cup Size (oz.): (1) 5, (2) 33 3/4, Paint Cup Material: Aluminum

Buy Vaper 19220 HVLP Triple Set-Up Spray Gun Kit 4 Piece

Saturday, July 9, 2011

Buy Marshalltown 693 SharpShooter I Hopper Gun with 45 Degree Angle Adapter

Marshalltown 693 SharpShooter I Hopper Gun with 45 Degree Angle Adapter

Product Specifications

Part Number:693
Power Source:air-powered
Item Package Quantity:1
Batteries Included?:Yes
Batteries Required?:Yes
Item Dimensions
Weight:4 Pounds
Length:15 inches
Width:20.50 inches
Height:10.50 inches

Technical Details

  • Plastic Hopper with a Specially Formulated Nylon Gun
  • Seven Orifice Sizes with Tubular Design for Reduced Overspray and Greater Texture Variety
  • Tight Sealing Flow Shutoff Prevents Leakage
  • Knurled Knob Allows for Easy Adjustment of Orifice Plate
  • Hopper Remains Level while Spraying Floors and Ceilings

Product Description

From the Manufacturer


Marshalltown 16356 SharpShooter I Hopper Gun with 45 Degree Angle Adapter is a plastic hopper with a specially formulated nylon gun. It features seven orifice sizes with tubular design for reduced overspray and greater texture variety, as well as a tight sealing flow shutoff to prevent leakage. A knurled knob allows for easy adjustment of orifice plate, and the angled hopper adapter allows the hopper to remain level while spraying floors and ceilings. The gun features a handy air control valve which allows flow control at the gun instead of at the pump, and an easy pull swing-trigger for greater control and less fatigue, with adjustable trigger stop for more consistency in pattern. A seamless corner design eliminates material build-up in the hopper, which has a capacity of approximately two gallons.

Product Description


Plastic hopper and specially formulated nylon gun. Seven orifice sizes with tubular design for reduced overspray and greater texture variety. Tight sealing flow shutoff prevents leakage. Knurled knob allows for easy adjustment of orifice plate. Angled hop per allows user to spray ceilings and walls with hopper gun in upright position. Gun features a handy air control valve which allows flow control at the gun instead of at the pump. Easy pull swing trigger for greater control and less fatigue with adjustab le trigger stop for more consistency in pattern. 45 degree angled hopper adapter included.

Buy Marshalltown 693 SharpShooter I Hopper Gun with 45 Degree Angle Adapter

Friday, July 8, 2011

Buy Wagner 0516009 PF 30 5/8 HP 3,000 PSI Pro Force Paint Sprayer

Wagner 0516009 PF 30 5/8 HP 3,000 PSI Pro Force Paint Sprayer

Product Specifications

Part Number:516009
Item Package Quantity:1

Technical Details

  • 5/8 HP motor
  • .30 GPM flow supports an .018-inch spray tip
  • Includes 25-foot of spray hose and a durable metal spray gun
  • Rugged cart with telescoping handle

Product Description

From the Manufacturer


Performance and portability make the PF 30 an attractive choice for painting contractors, maintenance departments, and property managers. The PF 30 features a rugged cart for big job mobility a with removable handle for convenient transport and storage. The 5/8 HP Motor is a durable double stroke airless piston pump that provides longer life, shoots .30 gallons per minute at 3000 PSI. It will support up to a maximum spray tip size of .018.  The PF 30 includes a 516 self cleaning reversible spray tip and a durable metal four finger commercial grade airless spray gun with a full size in line filter. 25-foot of airless high pressure spray hose, a telescoping cart handle and heavy duty cart and wheels keep you mobile around the job site. The PF 30 can be used with either 1 or 5 gallon paint containers that attach with an included paint bucket clip. Sprays unthinned latex and oil-based paints, stains, and sealers.

Product Description


Performance and portability make the PF 30 an attractive choice for painting contractors, maintenance departments, and property managers. The PF 30 features a rugged cart for big job mobility a with removable handle for convenient transport and storage. The 5/8 HP Motor is a durable double stroke airless piston pump that provides longer life, shoots .30 gallons per minute at 3000 PSI.

Buy Wagner 0516009 PF 30 5/8 HP 3,000 PSI Pro Force Paint Sprayer

Thursday, July 7, 2011

Buy Wagner Power Products 515902 Paint Crew Roller Arm Accessory

Wagner Power Products 515902 Paint Crew Roller Arm Accessory

Product Specifications

Part Number: 0515902
Item Package Quantity:1
Item Dimensions
Length:10 inches
Width:14 inches
Height:17 inches

Technical Details

  • Paint roller attachment for Wagner power sprayers
  • Push-button supply for fast, even coverage of large, interior surfaces
  • Paint is distributed from the paint can through a hose to the roller cover
  • Weighs less than 1-1/2 pounds

Product Description

Amazon.com Product Description


You love that power paint sprayer for exterior painting; now love it for interior paint jobs, too. Attach this roller to all Wagner Piston Pump and Paint Crew Sprayers, for interior roll-on painting without the worry of overspray. No more back and forth to the paint tray every time the roller goes dry, with the press of a button, paint is distributed from the paint can through a hose to the roller cover for ultra-fast, super-smooth wall and ceiling painting. --Brian D. Olson

Product Description


Roller arm attachment for Paint Crew and Piston Pump Sprayers. Simply attach to the end of the spray gun and begin rolling. For use with Wagner specially designed roller covers #0155206 and #0155208 Roller Cover, #0511110 Sponge Roller Covers, #0511112 Silky\Smooth Roller Cover.

Buy Wagner Power Products 515902 Paint Crew Roller Arm Accessory

Monday, July 4, 2011

Buy Wagner Power Products 0417005 HVLP Control Sprayer

Wagner Power Products 0417005 HVLP Control Sprayer

Product Specifications

Part Number: 0417005
Item Package Quantity:1
Item Dimensions
Length:33 inches
Width:11.38 inches
Height:11.25 inches

Technical Details

  • HVLP control sprayer for spraying thin materials such as deck stain, wood sealers, and more
  • Maximum control, low overspray; 3 pattern shapes; variable flow control; 4 psi at 40 cfm
  • Light plastic housing and reservoir
  • Includes sprayer and 1-1/2-quart sprayer cup
  • 1-year warranty

Product Description

From the Manufacturer


This Wagner power paint sprayer uses HVLP air technology to spray thin materials with maximum control and lower overspray than traditional sprayers. Pattern shapes can be changed from vertical or horizontal fan patterns for larger surfaces to round patterns for more detail work. Material size and flow rate are adjustable at the trigger. Sprayable materials include deck stains, clear wood sealers, waterproofers and enamels. Great for deck railings, yard play sets, kids toys, and yard furniture.

Product Description


The Wagner Control Spray HVLP paint sprayer uses HVLP technology to spray thin-bodied enamels and transparent stains with much more control than aerosol sprayers. Paint Capacity (gal.): 1/4, Wheel Size (in.): No wheels

Buy Wagner Power Products 0417005 HVLP Control Sprayer

Buy Professional Grade 1.7mm HVLP Air Spray Gun with Gun Metal Finish

Professional Grade 1.7mm HVLP Air Spray Gun with Gun Metal Finish

Product Specifications

Part Number: 31215A
Power Source: air-powered
Item Package Quantity:1
Item Dimensions
Length:9 inches
Width:6 inches
Height:5 inches

Technical Details


  • Professional-quality high-volume, low-pressure spray gun kit for professional results
  • 1.7mm spray nozzle; 600cc aluminum cup
  • Operating pressure: < 40 PSI, average air consumption: 4.5 CFM; spray pattern control knobs
  • Finished with Gun Metal Nickel for long-life durability
  • Includes air-adjusting valve, gauge, aluminum cup, nozzle

Product Description


An outstanding value in a professional-quality HVLP set to get you professional spraying and painting results. One-year warranty and Satisfaction Guarantee.

Buy Professional Grade 1.7mm HVLP Air Spray Gun with Gun Metal Finish

Friday, July 1, 2011

Buy Campbell Hausfeld DH6500 Siphon-Feed Spray Gun

Campbell Hausfeld DH6500 Siphon-Feed Spray Gun

Product Specifications

Part Number: DH6500
Power Source: air-powered
Item Package Quantity:1
Item Dimensions
Length:9.82 inches
Width:15.22 inches
Height:13.22 inches

Technical Details

  • Great choice in an economical spray gun
  • Produces a fine finish for most automotive and equipment painting.
  • Produces a fine finish for most furniture painting
  • Pattern control adjusts fan size
  • Includes 1 qt anti drip canister

Product Description


From the Manufacturer


High Volume Low Pressure (HVLP) spray guns operate at lower air cap pressures than conventional spray guns (below 10psi). Atomized paint from an HVLP spray gun is delivered to the work surface at lower velocities than conventional spray guns, reducing bounce back and overspray. This results in a higher transfer efficiency of material, reducing paint consumption by 20-30%.

Product Description


Professional model. Sprays enamel, lacquer, stain, or acrylic for customizing and restoring automobiles, trucks, and motorcycles. Nonbleeder, siphon feed gun. External mix. For use with a pressurized paint tank. Requires 6.8 SCFM at 40 P.S.I. 1 quart cani

Campbell Hausfeld DH6500 Siphon-Feed Spray Gun